ELGAR 9012A REPAIR and ELGAR 9012A CALIBRATION
 
Custom-Cal has a high success rate in the repair of the ELGAR 9012A. A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ELGAR 9012A Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   ELGAR 9012A (PIP 9012A)   Description / Specification:    
ELGAR 9012A Plug-In Programmable Oscillator for AC Power Source

The Elgar PIP 9012A Plug-In Programmer (PIP) is a microprocessor-based, multi-function system that features remote programming or local control via a 12-pad keyboard with display and function enunciators. The 9012A provides full GPIB control of simultaneous voltage and frequency and has a 1 to 9 full or half cycle dropout capability. With the test option, the front panel display becomes a digital meter to read the RMS volts, amps, watts and frequency. The PIP 9012A is ready to plug in to any of our full line of AC linear power sources. It is programmable via the IEEE-488 GPIB bus, or locally from the front panel keypad. Built-In Test (BIT) provides continuous self-testing for overvoltage, open sense leads and overcurrent. It shuts down the output voltage when any discrepancies occur between actual and programmed values. The output voltage is automatically programmed to zero during relay transfer time with off and on executed at zero crossings. This feature requires the “D” option on the AC power source.
Specifications.

Frequency range (Programmable): 45 to 99.99 Hz, 45 to 999.9 Hz, 45 to 5000 Hz.
Resolution: 0.01/0.1/1.0 Hz.
Accuracy: 0.001% of Set Value.
Voltage Mode: Programmable, Simultaneously.
Voltage Range: 0-135 VAC, 0-270 VAC.
Resolution: 0.1 VAC.
Programming Accuracy: ±0.2% of Full Scale.



 

Standard Calibration $25.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ELGAR 9012A. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Crest Factor
Crest factor or peak-to-average ratio (PAR) is a measurement of a waveform, calculated from the peak amplitude of the waveform divided by the RMS value of the waveform

Linearity
Linearity is the relative difference between the displayed power ratio, Dx/D0, and the actual (true) power ratio Px/P0 caused by changing the displayed power level from the reference level, D0, to an arbitrary displayed level, Dx.

Phase Noise
Phase noise is the frequency domain representation of rapid, short-term, random fluctuations in the phase of a waveform, caused by time domain instabilities. Phase noise (L(f)) is typically expressed in units of dBc/Hz, representing the noise power relative to the carrier contained in a 1 Hz bandwidth centered at a certain offsets from the carrier.

Sensitivity
Sensitivity is the minimum magnitude of input signal required to produce a specified output signal having a specified signal-to-noise ratio, or other specified criteria.

Please contact us for your ELGAR 9012A REPAIR and/or ELGAR 9012A Plug-In Programmable Oscillator for AC Power Source CALIBRATION
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: